Washer & Dryer Removal in Sacramento

Upgrading your laundry? We disconnect and haul away your old washer and dryer from anywhere in the house — and recycle the metal instead of landfilling it.

A new washer and dryer is great — until you’re stuck with the old set taking up the laundry room. Take Care Junk removes both, handles the awkward disconnection and the stairs, and recycles the steel so your old machines don’t just end up buried.

We Handle the Whole Job

Washers are heavy and full of water lines; dryers may be gas or electric with a vent to disconnect. Our crew manages all of it safely, protects your walls and floors on the way out, and clears both units from basements, upstairs laundry rooms, or tight closets — no need to move anything first.

Recycled, Not Landfilled

Washers and dryers are mostly steel, which is highly recyclable. We route your old set to a scrap-metal recycler so the materials get reclaimed rather than taking up space in a Sacramento landfill.

What We Remove

  • Top-load and front-load washers
  • Gas and electric dryers
  • Stacked and combo laundry units
  • Commercial and coin-op machines
  • Utility sinks and old laundry cabinets

How It Works — Four Simple Steps

Getting rid of an old washer and dryer shouldn’t be complicated. Here’s exactly what to expect when you book with Take Care Junk:

  • 1. Book online or call. Tell us what you have and where it is. Pick a time window that works — same-day and weekend slots are usually available.
  • 2. Get an upfront quote. When our crew arrives, we look at the item, confirm the price on the spot, and only start once you say go. No hourly meter, no surprises.
  • 3. We do the lifting. Our insured two-person crew carries everything out — down stairs, through tight doorways, wherever it sits. You never touch it.
  • 4. We haul it off responsibly. We donate what’s usable and recycle what we can before anything heads to the landfill, then sweep up and go.

Disconnection Done Safely

The part most people dread is the hook-up. Washers tie into hot and cold water lines and a drain, and there’s always a little water left in the hoses. Dryers are either electric on a 240-volt plug or gas with a flex line and a vent duct. Our crew disconnects standard water and electric connections for you and drains the hoses so nothing floods your floor. For gas dryers, we ask that the gas valve be shut off first for safety, then we handle the rest — capping, unhooking the vent, and carrying it out.

Great for Remodels, Rentals, and Downsizing

Laundry appliances turn over for all kinds of reasons — a kitchen or laundry remodel, a rental turnover between tenants, a move to a smaller place, or an upgrade to a stackable unit to free up space. Whatever the reason, we can clear a single machine or a whole utility room, including the old laundry sink, wire shelving, and the pile of stuff that always accumulates back there. Property managers across Sacramento use us to reset laundry rooms fast between tenants.

Frequently Asked Questions

How much does washer and dryer removal cost?
A washer-and-dryer pair typically starts around $90–$150 depending on access and whether other items are going. You’ll get an upfront, all-in quote before we start.
Do you disconnect the machines?
Yes — we disconnect standard water lines and unplug the units as part of the removal. For hard-wired or gas connections, we ask that the utility be safely shut off first.
Can you remove machines from an upstairs laundry room?
Yes. We handle stairs, tight hallways, and closet installs regularly and bring the equipment to move heavy units safely.
What happens to my old washer and dryer?
They’re sent to a scrap-metal recycler where the steel and components are reclaimed — keeping them out of the landfill.
Do you take just one machine, or only pairs?
Either. Whether it’s a single dead washer or a full set plus the utility sink, we price it to the job — there’s no requirement to remove both.
Can you do a same-day pickup for a rental turnover?
Often yes. Property managers regularly book us same-day or next-day to reset a laundry room between tenants; call early for the best shot at a same-day window.

Real Customer Reviews

★★★★★ Rated 5.0 · 243 Google reviews + 100+ five-star reviews on Yelp

CW
Craig W.Feb 2019
Yelp
★★★★★

Fast, professional and thorough.

BF
becca favila2 years ago
★★★★★

I hired TCJ Hauling to remove our hot tub and I am very pleased with their work. Serge was really good at explaining the process to me and having everything he needed with him. He drained…

TH
Thomas Harris3 years ago
★★★★★

Serge and his team were incredible. Very hard working and went above and beyond to help me with a project that at first seemed overwhelming. I called on a Thursday and Serge worked through…

RB
Richard Blacka year ago
★★★★★

TCJ HAULING is awesome! Serge is a man of his word and works hard for you! Point to what you want removed and it’s gone! I had a refrigerator buried in my garage. They tunneled through my…

PC
Prameet Chandra11 months ago
★★★★★

Messaged TCJ Hauling to get rid of some junk accumulating in the garage. Not only was the company able to come the same day but they were also very punctual and reliable, which above all…

VA
Victor Artache3 years ago
★★★★★

Serge contacted me 30 minutes before his scheduled time. He was professional, quick and left our home clean after removing our hot tub. I would highly recommend TCJ hauling for all your…

CA
Callie Aberin2 years ago
★★★★★

We have used this company for years and Serge is the best!! Highly recommend for any hauling needs you have.

EP
ellen peronea month ago
★★★★★

Our daughter had moving junk to get rid of. Sergio came to pick it up the same day we called him. He was prompt, efficient, and personable. We would definitely recommend him!

Ready for a Free Quote?

Upfront pricing, clean trucks, no hidden fees. Same-day and weekend appointments available across Sacramento.

Book Online & Save $20
Close

Book Now & Save $20

Fill out the form and receive your FREE no obligation quote today

  • Accepted file types: jpg, jpeg, png, gif.
  • This field is for validation purposes and should be left unchanged.